Recently Updated: 19 min read

Outreach Follow-up Emails: Count, Spacing and Closing

Outreach Follow-up Emails: Count, Spacing and Closing

A follow-up email is the second message a publisher receives after a pitch that got no reply. A sound one is short, carries something the first message did not, and tells the reader how the thread ends. Practical suggestion: send no more than two follow-ups, change the value you offer each time, and log a closing note in your tracking sheet after the last one. For site owners, agency staff and interns who pitch publishers, the useful question is not "how many times until someone answers" but "where do we stop politely, and where do we record that".

How to write the first pitch is outside this topic. What remains is the decision set around silence: how long to wait, the number of messages to send, what each message adds, how to close and which addresses receive no further email. No search engine or government body publishes a rule for follow-up timing or count, so every number here is a test value labelled as a practical suggestion. Check it against your own sheet and change it.

Example scenario: a skate shop wrote to the editor of a youth sports blog, offering a guest post on choosing a first skateboard deck size. The editor has not replied. The scenario is fictional and shows how each decision is made.

Waiting after the first message: business days and time zones

The wait is meant to give the publisher a fair chance to read the pitch. That chance is measured in the publisher's working days, not in calendar days and not in the sender's time zone.

What the clock actually measures

Start counting on the first working day after the message arrived in the recipient's inbox. A pitch sent on a Friday evening in Istanbul reaches an editor in another country at a different hour, and for an editor who opens the inbox on Monday morning it simply sits there until then. Next, look at the publisher's rhythm. A site that publishes on a fixed weekday schedule may review new pitches only after the week's lineup is set, and the archive shows that rhythm. Finally, consider the type of request. Pitching a new article is not the same as asking for a link on an existing page, and the difference between those formats is laid out in guest post, sponsored post and niche edit compared.

Weekends, holidays and out-of-office replies

Public holidays differ by country, so a follow-up that lands in the publisher's holiday week is badly timed. An automatic out-of-office reply is the strongest timing signal you can get: if it names a return date, schedule the follow-up for the first working day after it. A publisher's own view of response timing appears in a publisher's timing reasoning for link removal requests, which shows that silence on the other side can reflect workload rather than refusal.

Table: waiting plan with test values

CaseWhere the count startsWhat to log
Pitch for a new article, publisher in the same countryThe next working day; test value: wait a few business days (Practical suggestion)Send date, send time and planned follow-up date
Pitch sent late on a FridayThe first working day after the weekendWeekday and send time
Publisher in another time zoneThe publisher's own business dayTime zone and offset
Public holiday where the publisher is basedThe first working day after the holidayHoliday name and last day
"I will get back to you"The date the publisher named; do not invent another intervalThe date and the exact sentence
Automatic out-of-office replyThe first working day after the stated returnReturn date from the automatic reply

The values are starting points. Compare which waiting intervals actually drew replies in your own sheet, then lengthen or shorten them. In the example scenario the skate shop sent its pitch on a Friday, so it begins counting on Monday and logs both the send date and the planned follow-up day.

Follow-up count: one, two or three

The count is a business rule your team owns. Practical suggestion: store it as a column and record which follow-up each publisher is on.

One follow-up

A single follow-up asks the least of the publisher. It fits when the relationship already exists, for example when the editor shared the shop's earlier work or met the owner at an event. The trade-off is that one reminder gives a buried message only one more chance.

Two follow-ups

Two follow-ups is the suggested default. The first reminds the editor with something new. The second says plainly that it is the last message and that no reply is needed if the topic does not suit. That sequence addresses the risk of a lost message without turning the inbox into a queue of reminders.

Three or more

A third follow-up carries no new information if the publisher has given no signal. Each extra message uses the editor's time and weakens the goodwill of the first pitch. A third message can be defended only when an indirect signal exists, such as "ask me again at the end of the month", and that date has arrived.

Decision rule

Decision rule: if the publisher is silent, send no more than two follow-ups and set the record to "closed" after the second. If the publisher says "not now", the count does not restart; the date they name becomes a new waiting period with one planned message. If the publisher declines, send nothing further and move the address to the do-not-contact list.

ReplyAction on the day it arrivesWhat happens to the sequence
InterestedAnswer and move to content and termsRemaining follow-ups are cancelled
"Not now, ask again next month"Log the date they gaveOne message is planned for that date; the count does not reset
Clear declineA brief thank-youNothing further; the address joins the do-not-contact list
Redirect to a colleagueA fresh first message to the colleague, linked to the old recordThe old record closes as redirected
Opt-out requestStop at onceThe address joins the list and the date is logged
No replyWait out the intervalFollow-up 1, follow-up 2, then closed

Adding new value in a follow-up

"Just checking in" gives the publisher nothing. A follow-up earns its place by carrying information that was missing from the first message, anything that makes the editor's decision easier or the editor's work lighter.

Forms of new value

  • A headline the editor could use as written.
  • A ready image, chart or source list.
  • A pointer to a recent article on the publisher's site that shows how the pitch fits.
  • Flexibility on the delivery date and the publishing calendar.
  • A two-sentence outline written for the publisher's readers.
  • A format that saves editing time: prepared headline, list of links, short author line.

Material for the author line and the topic suggestion is covered in the guest blogging pitch, author bio and portfolio guide. If the new value is a short content summary, how to send a brief to a publisher shows what such a brief contains.

Example scenario: the skate shop's first follow-up

Example scenario: the shop's first follow-up offers two alternative headlines, states in one sentence which reader question the post answers (how to match deck width to shoe size and riding style) and mentions that a labelled photo of the board anatomy is ready. The subject line stays tied to the original topic: "First deck size guide: two headline options". The body is four or five sentences and holds one question: "Does either headline fit your editorial calendar?"

Example scenario: the shop's second follow-up and close

Example scenario: the second follow-up adds nothing new. It refers briefly to the two earlier messages, says this is the last one and mentions that the post will be offered elsewhere. It tells the editor that a reply is welcome if the idea interests them and unnecessary if it does not. It contains no deadline and no "last chance" phrase.

Anatomy of a follow-up

ElementDoAvoid
Subject lineName the first topic and the new value"Re:" prefixes, "urgent", "final warning"
OpeningOne sentence pointing back to the first messageBlame such as "you did not answer"
New valueTwo or three sentences with a headline, outline or sourceRepeating the first message
QuestionOne yes-or-no questionSeveral questions at once
Exit lineSay that no reply is needed if the topic does not suitDeadlines or "last chance" wording
SignatureName, company and siteA sender identity that hides who is writing

Subject line, tone and sender identity

A tempting mistake is to make the follow-up look like part of an existing conversation. A "Re:" prefix on a thread the publisher did not answer creates that impression falsely. The FTC guide asks that subject lines not be deceptive and that they accurately reflect the content of the message. It is a United States guide, so it is read here as a general principle of honesty and not as Turkish law.

Honest subject lines

The subject line says what the message is about. "Urgent" or "final warning" is misleading if the content does not match. For a follow-up, a plain line that names the first topic and the new value is enough. In the example scenario, "First deck size guide: two headline options" describes the message accurately.

Tone and length

A follow-up should be shorter than the first message. Within the first two or three sentences the editor should see what is being asked and what is new. Accusing lines such as "you did not answer" and pressure phrases damage the relationship. An opening like "this may have slipped past your inbox" does not judge the publisher's behaviour.

Who is writing

The guide also asks that header information not be false or misleading, so the sender name and address must identify the person who started the message. When an agency writes on behalf of a client, the signature should state who is writing and for which site. The guide adds that hiring another company to handle email does not remove the hiring party's duties. For agencies that means follow-ups sent by an intern or an outside team fall under the same rules.

Reading the reply: yes, no, not now, wrong person

The point of the sequence is to draw a reply, and the way you receive that reply decides what happens next. If the sheet defines the record and next step for each answer in advance, a new teammate follows the same rule.

A positive answer

Once the editor shows interest, the follow-up sequence stops. The status becomes "Replied" and any remaining planned follow-ups are cancelled. From there the conversation turns to content and publishing terms. For the publisher's side of such offers, replying to guest post and link offers shows how an editor weighs an incoming pitch.

A refusal

A refusal is met with a short thank-you. Do not ask for reasons, push or send an alternative offer. The status becomes "Declined" and the address moves to the do-not-contact list. If the publisher gave a reason, a one-line note in the sheet helps adjust later pitches to similar sites.

Not now, or ask someone else

A reply such as "ask me at the end of the month" does not reset the follow-up count. Log the date and plan one message for it. If the editor points you to a colleague, the message to the colleague is a first message, and a note links it to the earlier record. Keep the redirecting sentence in the sheet so the new message can say "your colleague suggested we write to you".

What the FTC guide and the Turkish regulation announcement say

Two sources frame the limits that apply to follow-up emails. The FTC guide belongs to the United States. The Ministry of Trade's 2015 announcement describes the Turkish regulation on commercial communication and commercial electronic messages.

From the FTC guide

The FTC CAN-SPAM compliance guide (Opens in a new tab) says not to use false or misleading header information, not to use deceptive subject lines, to identify the message as an ad, to tell recipients where you are located and to tell recipients how to opt out of future marketing email. According to the guide, the opt-out mechanism must be able to process requests for at least 30 days after the message is sent, and each request must be honored within 10 business days. The guide states that it makes no exception for business-to-business email.

From the Ministry of Trade announcement

The Ministry of Trade announcement (Opens in a new tab) says recipients may refuse commercial electronic messages at any time and without giving a reason, that the refusal must be possible through the same channel the message was sent on, easily and free of charge, and that sending must stop within three business days after the refusal reaches the sender. It also says prior consent is not mandatory for messages sent to the electronic addresses of merchants and tradespeople, but that once they exercise the right to refuse, no further messages may be sent without their consent. Practical suggestion: do not spend time on whether a given publisher counts as a merchant or tradesperson; handle every refusal and opt-out request the same way.

What to take from both

Practical suggestion: cancel the follow-up plan the moment an opt-out arrives and add the address to the do-not-contact list on the same day. That sits under both the three-business-day and the 10-business-day figures, so there is no need to debate which is stricter. Read opt-out phrases broadly. "Please stop writing", "do not email me again" and "not interested, take me off your list" all count as requests to stop, not only the word "unsubscribe".

A polite close: the note to log when no one replies

When the publisher stays silent after the last follow-up, the record is not left blank. The closing note tells the next person whether the publisher may be approached again and why the team stopped. Without it, someone else may write to the same publisher months later as if for the first time.

Fields in a closing note

  • Who wrote the note and on which day the record was closed.
  • Why it closed: no reply, declined, deferral expired or wrong contact.
  • How many follow-ups went out, with their dates and the value offered in each.
  • Whether writing again is allowed: yes, no, or only from a given date.

The closing message itself

The closing message is short, grateful and leaves a way back. Example scenario: the skate shop writes in its second follow-up, "As we have not heard back on the two earlier messages, we will close this thread here. Thank you for your time. If you ever need a guide for beginner riders, a reply to this email is all it takes." The message asks nothing, does not insist and leaves one route back.

Writing again later

If the editor stayed silent without opting out, record a date or condition for writing again. Practical suggestion: write again only with a new topic or new value, and do not send the same pitch to the same editor twice. The new message refers to the earlier thread in one sentence, and the earlier sequence stays in the sheet as a separate entry.

A do-not-contact list

The do-not-contact list holds addresses and domains that must receive no further messages. An address goes on it when a decline, an opt-out or a plain "do not write to me" arrives. It can be a separate tab or a status value, and what matters is that every address is checked against it before any send.

Entries and what to keep

TriggerWho is blockedEarliest next contact
Clear declineThat addressNone planned; keep the date and the publisher's sentence
Opt-out requestThat address, and other clients' pitches if the team rule says soNone without the publisher's consent
BounceThe bounced address onlyAfter a corrected address is confirmed
Two follow-ups unansweredThe record, not the personThe date or condition set in the closing note
ComplaintThat addressNone planned; keep who complained and when

Rules for using the list

A closed record and an opt-out are different things. A closed record can carry a date or condition for writing again. Once they exercise the right to refuse, no further messages may be sent without consent, and the Ministry of Trade's 2015 announcement says this holds for merchants and tradespeople as well. Writing to an opted-out publisher "about a different topic" later does not fit that.

Keep one copy of the list. If each teammate keeps a private version, an address that opted out looks active in someone else's sheet. Agencies that write to one publisher for several clients also have to decide whether an opt-out received for one client stops the other clients' pitches. That decision belongs to the team, and it should be written at the top of the sheet.

Reviewing the follow-up queue each week

A follow-up plan only works if someone looks at it on a schedule. A weekly review turns the rules into habit and shows which rows are overdue.

Columns the follow-up plan needs

FieldFormatQuestion it answers
First message sentDate plus local timeWhen did the wait begin?
Publisher time zoneCountry and offsetWhose business days are counted?
Follow-up number0, 1 or 2Has the cap been reached?
Next follow-up dateOne dateWhat is overdue this week?
Value offeredShort labelAre we repeating ourselves?
StatusDropdownWhere does the row stand?
Permission to writeYes, no, after a dateDoes the do-not-contact list agree?

Who sends and who records

Practical suggestion: the person who sends a message also updates the row. When those tasks are split, the update is forgotten and the publisher receives the same follow-up twice. Example scenario: the skate shop has two people on outreach. Every Monday they filter rows whose next follow-up date falls this week, send the planned messages, mark rows that already had their second follow-up as closed and remove rows with replies from the queue. No publisher receives two different follow-ups in one week.

Problems to catch before sending

Run the checklist on every follow-up before it goes out. Each item corresponds to a column in the sheet.

  1. The address is not on the do-not-contact list.
  2. The publisher has not sent a decline, an opt-out or a deferral.
  3. The wait has passed, counted in the publisher's business days.
  4. This is not a message after the second follow-up.
  5. The message contains value that the earlier ones lacked.
  6. The subject line describes the content accurately.
  7. The sender name and signature identify who is writing and for which site.
  8. The message has one question and a clear way out.
  9. The sheet shows the send date, follow-up number and next step.

Chasing a silent editor on another channel

Messaging the same editor on social media or through a contact form after the email sequence has ended turns a polite pitch into pressure. Practical suggestion: treat the email thread as the only channel unless the publisher named another one. Pressure phrases are also a warning sign when a seller uses them on you, and red flags in a backlink seller quote shows how to read them; using them in your own follow-up points the same warning at your team.

Pasting the old thread into the new subject line

Copying the earlier subject with a "Re:" or "Fwd:" prefix makes the follow-up look like an answered conversation. The FTC guide asks that subject lines reflect the message accurately, so give the follow-up a plain subject of its own.

Skipping the closing note

Dropping the sequence without a final message leaves the editor unsure whether more mail is coming and leaves your sheet without a record. The second follow-up should say it is the last one, and the closing note is logged the same day.

Counting calendar days

Counting the wait across weekends and holidays makes the first follow-up arrive before the editor could reasonably have read the pitch. Count the publisher's business days and log any holiday that moved the date.

Changing the topic inside a follow-up

A follow-up that pitches a different article from the first message confuses the thread. Keep the first topic and add the new value to it; a different topic is a new first message with its own record.

Frequently Asked Questions

Is a follow-up the same as a reminder?

A reminder repeats the request. A follow-up in the sense used here adds something the first message lacked, such as a headline option, a short outline or a source, so the editor has a reason to look again.

How long should the wait before the first follow-up be?

Practical suggestion: wait a few business days in the publisher's own time zone and compare, in your sheet, which intervals drew replies before you adjust the wait.

Can the sheet allow a third follow-up?

It can, but the suggested default is two. Practical suggestion: allow a third only when the publisher gave an indirect signal, such as a date to ask again, and that date has arrived.

What if the editor replies "not interested"?

Thank them briefly, set the status to "Declined" and add the address to the do-not-contact list. Do not ask for reasons and do not send a follow-up.

Does the Turkish regulation set a time limit for stopping messages after an opt-out?

The Ministry of Trade's 2015 announcement says sending must stop within three business days after the refusal reaches the sender. Practical suggestion: stop on the day the request arrives.

Can I write "Re:" in the subject of a follow-up?

Not when the publisher has not replied, because the line suggests an earlier exchange that did not happen. The FTC guide asks that the subject line reflect the message content accurately, so name the first topic and the new value instead.

Does the FTC guide apply to a pitch sent to a publisher in Turkey?

The guide says it makes no exception for business-to-business email, and the Turkish announcement should be read for the rules that apply in Turkey.

Conclusion

A good follow-up respects the publisher's time and carries something new. Count the wait in the publisher's business days, cap the count at two unless a clear signal says otherwise, and record the date, the number and the next step after every send. Close politely, and put opt-outs and refusals on the do-not-contact list the same day.

Once the wait and the cap have been tested against your own data, outreach reaches publishers at a sensible moment with something worth reading. If you are planning guest posts with publishers, you can look at the guest post service.

0 Comments

No comments yet for this article.

Post a comment

Please log in to leave a comment. Login